A1 Foundation Crack Repair Blog

Sometimes, no matter what, when you live in a flood zone,  your house will flood in heavy rain. I have a friend who lives on a street called Water Row Lane, and last year their neighborhood had to collectively rent the Boston Duck Boats for 2 weeks to transport them from their homes to their cars in a nearby parking lot.

Water, might be good for flowers, plants, and trees, but it’s not so good for houses.

Live in a flood zone?

If you live in an area that has a high flood risk, elevate the furnace, water heater, electric panel, washer and dryer in your home at least 12 inches above the projected flood elevation.

You should have check valves installed in your home to prevent flood water from backing up your drains.

Have a sump pump installed,  and if you have a sump pump, make sure it’s working and install a battery-operated backup, in case the power goes out.

Clean debris from your gutters and downspouts.

After a flood

Check outside for loose power lines, gas leaks, foundation cracks or other damage. Make sure your porch roofs and overhangs still have their supports. Check your home’s and your out building’s foundations for settling, cracking or undermining. If you see damage, get a building inspector or contractor to check the home before you go inside.

Turn off all electrical switches, even if the power is out.

While the electricity is off, hose down the house to remove any health hazards left by floodwater and mud.

If your furnace or water heater floods, have a technician check them before turning them on.

If your basement is flooded, pump the water out in stages.

Dry out appliances such as washers and dryers before using them. They might need several days to dry.
 
Mold

Mold can produce allergens, and, in some cases, potentially toxic substances that can make you sick, so you need to ensure your home is as mold-free as possible.

Water damage should be taken care of within 48 hours after the incident or mold growth (or worse, bacteria and viruses) will occur.

The best way to prevent mold is to remove wet contents from your home immediately.

Wet items should be cleaned with a pine-oil cleanser and bleach, completely dried, and monitored for several days for any fungal growth and odors.

Dry out damaged rooms by opening windows and using high-pressure fans. If your carpets are damaged, you should strongly consider installing new ones.

Keep the indoor humidity low, ideally from 30 percent to 50 percent. Make sure places of high humidity, such as bathrooms, are well-ventilated. Use a dehumidifier whenever necessary.

Even if you remove the mold, if the water problem (i.e. a leaky pipe or cracked foundation) is not fixed, the mold will come back.
 
Hiring a Contractor

Do the research. Ask friends and neighbors and read reviews. Make sure the contractor can do the type of work needed, foundation and basement crack repair . And check the contractor’s current references.

Check withe the Better Business Bureau, A1 Foundation Crack Repair has an A+ Rating.

Contractors can’t collect more than one-third of payment up-front unless the job requires materials that must be specially ordered. They also cannot demand any payment before the contract is signed.

Comments (0) | Trackbacks (0) | Permalink |

A leaky basement can be a nightmare. Regular dampness can cause mold growth and musty smells, stored items can be ruined, and the foundation of your home can even be damaged by regular water.  If you have moisture, drips, seepage, or other water related issues in your basement, you need to get it sealed and dried out fast, before bigger problems develop.

The first step to eliminating the moisture problems in your basement is to identify the source of the water. Once you have located where the water is entering the building, you can resolve the problem.

Drainage Problems

Exterior drainage issues can be a major source of water in your basement; if water is brought away from your foundation, it can work its way inside. If you notice water flowing toward your house on rainy days, have blocked or malfunctioning gutters, or can see any signs of erosion, you likely have drainage problems. Some drainage problems are easy to fix: clean and repair your gutters if they aren't working. Pay special attention to downspouts, and be sure that they are directing water away from your house. Other drainage issues can be more difficult to fix. If it isn’t the gutters, you'll want to consult a professional basement waterproofing company. They will be able to identify problematic water patterns.
 
Basement Leaks

Water can also work its way into your basement through cracks or crevices in your foundation. This type of problem usually manifests itself as a visible break or fracture, a trickle of water, or a damp spot. Basement leaks can also be caused by porous foundations. There doesn't necessarily have to be a crack for water to be seeping in. You have a number of options for waterproofing your basement and A1 Foundation Crack Repair, waterproofing specialists, can provide professional basement sealing results.

Make sure you address water problems in your basement promptly; instead of assuming that they will go away on their own, foundation water problems frequently snowball into moisture and mold crises. Take the time to identify and resolve the source of the moisture-you won't regret it.

Comments (0) | Trackbacks (0) | Permalink |

Concrete is one of the most common materials used in construction because, simply put, no other material can produce the same results. Concrete is used for everything from concrete floors to building foundations. Despite this, problems can results with concrete over time. Problems arise for many reasons, not the least of which can be its exposer to excessive moisture. To avoid problems always be sure that high quality concrete is used and to stay vigilant for possible problems.
 
Concrete cracks often form in the basement walls. However, builders plan for cracking by putting steel reinforcements inside the concrete walls to maintain the wall’s strength. But don’t let this give you false hope that the cracks are insignificant.  Concrete cracks allow water into the basement, especially in older homes which do not have a waterproofing membrane installed like many newer homes do. However, even the waterproofing in newer homes can fail; the water proofing may not stretch over the crack and the membrane then tears or, if the grading is incorrect and slopes toward the house rainwater can pool next to the home above the waterproofing, enter the concrete crack and flow to the interior.

It is very important to get these cracks, even if they are small, fixed. It is these cracks that cause the problems in the foundation of your basement. They pose health risks, structural issues, and can damage your belongings. We have all heard of the hazards of mold, and moisture in your basement can lead to mold. Take a good look at the corners of your basement and check for mold growth.  Get foundation and wall concrete cracks repaired as soon as you can to maintain the safety and well being of you and your home.

Comments (0) | Trackbacks (0) | Permalink |

In older homes, we expect basements to leak and have cracks. In general, damp basements seem like standard issue; especially concrete block foundations which seep and weep over time as they settle. Wet basement are just annoying aren’t they, nothing else? It’s something you can take care of later.

Unfortunately, not. The issues that arise with damp basements aren't always easy to recognize, and can create serious problems. Cracks in a solid concrete wall or floor are almost never only on the surface, it is practically a guarantee that the crack goes all the way through. This is a definite problem. Cracks create structural integrity issues, a chance for water to seep through the walls, and introduce the possibility of mold, not to mention pests.

Moisture can build up extremely fast. When these cracks are first detected, you need to take action immediately. Have them inspected and possibly repaired. Understand that putting some concrete on the front and cosmetically sealing the crack is not going to do the trick. It could actually do more damage if water leaks are present because sealing it at the surface could cause pressure to build. Concrete is porous and pressure build up will only cause the water to find another way through.

Hire a professional to take care of all you basements cracks and leaks. Your home is most likely the biggest investment you will ever make. A1 Foundation Crack Repair is the best solution for cracks and leaks in your home’s walls and foundation. Call us as soon as you detect a problem.

Comments (0) | Trackbacks (0) | Permalink |

Just because you don't see any water doesn't mean that the water is gone. The water is sitting either in your wall or just behind your wall which will lead to major health problems if not removed. Think about that cooler in your garage that you forgot to empty a week or two ago.  Recall the growth? The smell?  Consider that cooler year round behind the walls of you or your kid's bedroom.  It's neither pleasant nor health. 

That's is similar to what is happening this very moment in thousands of homes throughout the Northeast.  If you are currently (or have ever for that matter) witnessed even a little bit of water coming into your basement, you can rest assured that there is a lot more water sitting behind your wall.  This is because it takes significant pressure to push water into your basement the first time. But once water breaks through, the avenue only widens with time. 

If you do not seal your basement then mold will start to grow.  You will likely smell it before you see it. Have you ever been in a basement that was not leaking and smelled a damp musty smell? That's because the basement walls have been compromised and water has caused mold to grow inside of the walls.  Mold can and likely will lead to health problems if not taken care of. Consider the fact that home furnaces are commonly placed in basements, sucking in the ambient air down there, and systematically spreading mold spores into each and every room of the house.
 
The bottom line for the safety of you and your family is this.  If you smell musty air in your basement, have your home checked for water, mold, and mildew.  It really is that simple.  

Comments (0) | Trackbacks (0) | Permalink |

If you remodel your basement into the type of dream room that you have always wanted then you will most likely be proud of your achievement ... if it's done right. But before you congratulate yourself, you need to make sure that your new space is mold-proof. It is a common mistake to finish basements that are not mold-proof which can end up turning the dream into a nightmare. In many instances finished basements actually make mold more likely to occur because it creates the conditions that this fungus loves.

Mold just requires a few basic conditions and it is good to go. For mold to prosper it needs some dead organic material and some moisture. These are things which can be commonly found in most basements. Remodeling your basement can add to the problem because all that wood paneling and floor boards you are adding are giving it more to grow on. If you install a poorly ventilated shower in your basement you may as well prepare for mold because that is what you are going to get. You may not even notice that you have mold because if moisture is coming from the outside behind your wood paneling or underneath your new floor boards then this mold can be growing where you can't even see it. Mold that you can't see is the worst type of mold because it could lead to all sorts of damage to your health and finances.

So what are you to do? Now that you know how the problem arises you can take steps to prevent it from happening. Prior to commencing any finished basements project you will need to first check to see if you have dampness anywhere. If you find moisture and you are not certain about whether it is coming from inside or outside the house there is a little test you can perform. Put some plastic sheeting on the wall where you feel the dampness and leave for a day or two. If the water is on the outside of the plastic then you know you have condensation problems while if it is inside then you have water from the outside. Whatever the cause, you will need to remedy the situation before beginning any work on finishing your basement.

Comments (0) | Trackbacks (0) | Permalink |