A1 Foundation Crack Repair Blog

Massachusetts and Rhode Island have had quite a bit of rain. Unfortunately there are some more wet days ahead. We have met people who have water in the basement who never have before. Well, if your basement gets flooded once, it will get flooded again. Even well-made foundations can develop cracks and problems over time.

Between your foundation and your roof, it is hard to say which is more important to the structural integrity of your home, but surely, your foundation is the cornerstone of your home, the footing.

Foundation problems cause whole house problems. Settling soil, heavy rain, and other ground movement issues can cause water to enter a basement even if there has never been a water problem before. Serious problems can arise from cracking, crumbling, and settling in and around your foundation. When your basement gets flooded, those problems are compounded.

Click "flooded basement" if you are concerned about your foundation or have recently had water in your basement.

Comments (0) | Trackbacks (0) | Permalink |

Too many people are dealing with wet basements. Now that the hurricane is over you can address your wet basement problems and be prepared (and relaxed) for the next time. You need to not only clean up the water, but you need to prevent basement floods from happening again. Because, as many people found out, sump pumps are great, but if there is no power, there isn't a whole lot you can do.

Keep in mind that you have about 48 hours to get your basement dry before mold starts to grow. Water extraction is the key. It is important to get dehumidification equipment into your basement. You need the air to be dried out and dehumidified. Often sheet rock or plaster has to be removed and you need to get air behind the walls in order to get it dry. 

After you have your basement dried out, you need to take steps to ensure that you don’t get water again. It is a fact, if you get water in your basement once, you will get it again.   The first step is to figure out where it came from in order to address the best way of eliminating it in the future.

If you got water in your basement from the hurricane, contact A1 Foundation Crack Repair so we can help prevent you from EVER taking in water again.

Comments (0) | Trackbacks (0) | Permalink |

There is no question that homes with basements provide us with much more space than those with only crawl spaces. Often, homeowners will put recreational rooms in the basement, or perhaps an office. Other times, the basement will be storage, a tool shed and a laundry room combined, but this still provides us with extra space upstairs. So, there is no point in going into why a wet basement is a bother.

Water in the basement is a problem, even if it is empty, (and they never are). There are really two different ways in which water can enter our basement, and both will entail some form of waterproofing. Water can either come in slowly, almost undetected or it can quickly invade our basement causing a flood.

Moisture is often a problem since basements are below ground level, even if it is not visible. It may show up as mold or mildew. Even if you can’t see the moisture, there are definite signs that it is there.

Doing a little bit of basement waterproofing for this usually means installing a basement dehumidifier which will run on a regular basis, at least through the summer, fall and spring.

Of course, the other way you can get water in the basement is all at once, a flood. This can be destructive, especially if you use the basement for living space or storage. If the water is coming in at one specific location, sealing that location is necessary.

However, if your basement floods on a regular basis, measures that can be taken to fix this.

Having a problem with water in your basement is simply keeping you from enjoying part of your house. Although waterproofing your basement is going to take a little bit of work, it will all be well worth the effort whenever you can take this part of your home back again.

Comments (0) | Trackbacks (0) | Permalink |

In today’s housing market, you may come across a home that is priced well below market value. Often this is because of some type of damage or deficiency.  More often than not, this involves a flooded basement.  

If you are considering a home with a finished basement that has flooded, keep in mind that this can be very costly to repair and there a some issues to consider. Obviously, finished basements with water damage can be ripe with mold and mildew. This can cause severe problems that you need to think about before buying the home.

Finished basements often have wood or metal framed walls built inside the foundation walls or attached to the concrete in order to install the finish wall board.  These cavities are very susceptible to water damage; they will get flooded easily and are difficult to dry out.  Most of the time, the wallboard and insulation need to be removed in order to dry the area properly. Otherwise, mold and mildew growth will occur.

The floors in finished basements can be concrete, or they may have a sub floor built over the concrete floor. These sub floors are often wood.  This type of flooring is a problem in the event the basement floods.  Water can be trapped between the sub floor and the concrete and it is very difficult to dry out.  Again, most of the time, a sub floor needs to be removed and the area needs to be dried out completely to because of the high risk of mold and mildew damage.

Mold and mildew growth is a risk, to your home and your health.  There are many health problems which mold and milder exacerbate such as respiratory problems, immune system suppression, asthma infections and coughing.

If you are considering the purchase of a home that has had a flooded basement, expect to invest quite a bit of money into restoring and replacing the affected area.  Once that is done, the problem of stopping the water from entering  the basement needs to be addressed.

Comments (0) | Trackbacks (0) | Permalink |

In order to know how to waterproof a basement, you need to know how water enters the basement. There are many different ways water can enter the basement:  floor / wall joint, floor or wall crack, or through the bulkhead, to name a few.

Here we are going to talk about how water enters through the floor/wall joint.

The floor/wall joint is the most common entry source of water entering the basement. This is where the foundation wall meets the floor. The water comes in from the outside over the footing under the foundation wall and through where the foundation wall and floor converge. This is seen mostly when it rains. Water may seep in from other locations, but the most heavy water intrusion will be from the floor/wall joint.

When one concrete structure is poured (the floor) and another concrete structure is poured on it or next to it (the wall), a seam is created between the two concrete structures. Each concrete structure (the footing, the wall and the floor) is poured separately. There is a seam between each of these three structures. This allows the potential for water to come into the basement. There are four potential points of entry now: over the foundation footing, between the foundation walls, underneath the foundation and up through the seams between the foundation footing and the floor. This floor/wall joint seepage is very common and is a predominant reason for basement flooding.

Comments (0) | Trackbacks (0) | Permalink |

If basement water problems can be solved, you can gain some valuable storage or living space.  There are two ways to go about approaching water issues. The first is to address the leak from the outside of the foundation and the second is to deal with the problem from the inside. From both directions, there are waterproofing techniques designed to seal water out, and others that are designed to divert water from the foundation.

Waterproofing techniques and supplies that are generally used by do-it-yourselfers to seal water out of the basement include spray on sealants, membranes, and injection expanding epoxy waterproofing supplies designed to fill and seal cracks in solid concrete foundation walls. These are some of the least reliable methods of keeping water out because over time, they all succumb deteriorate.

There are also waterproofing supplies and techniques for diverting water on the exterior of the home. Dirt fill can be used along foundation to make the ground slope away from the house. This allows for water to runoff away from the home.

Regardless of the method you choose, exterior repair work is messy and expensive. The installation of anything on the exterior of the foundation will require excavation to expose the wall.

On the interior, the A-1 method of sealing out water from concrete floor cracks is with the gravity fed system. A polymer is used to create a bond between the concrete cracks and fills the entire void through to the bottom. The A-1 preferred method for foundation wall pipe penetration leaks is to inject the gap around the pipe with high-viscosity polyurethane. This polymer can be used on both wet and dry materials, and it can work its way into small hairline cracks to make a more powerful bond.

A-1 Foundation Crack Repair, Inc. was founded after more and more house builders requested the A-1 Method to solve problems that otherwise would have been cost prohibitive or simply too invasive. In fact, the A-1 Method not only repairs your existing cracks, but also helps prevent future ones!

Comments (0) | Trackbacks (0) | Permalink |

Sometimes, no matter what, when you live in a flood zone,  your house will flood in heavy rain. I have a friend who lives on a street called Water Row Lane, and last year their neighborhood had to collectively rent the Boston Duck Boats for 2 weeks to transport them from their homes to their cars in a nearby parking lot.

Water, might be good for flowers, plants, and trees, but it’s not so good for houses.

Live in a flood zone?

If you live in an area that has a high flood risk, elevate the furnace, water heater, electric panel, washer and dryer in your home at least 12 inches above the projected flood elevation.

You should have check valves installed in your home to prevent flood water from backing up your drains.

Have a sump pump installed,  and if you have a sump pump, make sure it’s working and install a battery-operated backup, in case the power goes out.

Clean debris from your gutters and downspouts.

After a flood

Check outside for loose power lines, gas leaks, foundation cracks or other damage. Make sure your porch roofs and overhangs still have their supports. Check your home’s and your out building’s foundations for settling, cracking or undermining. If you see damage, get a building inspector or contractor to check the home before you go inside.

Turn off all electrical switches, even if the power is out.

While the electricity is off, hose down the house to remove any health hazards left by floodwater and mud.

If your furnace or water heater floods, have a technician check them before turning them on.

If your basement is flooded, pump the water out in stages.

Dry out appliances such as washers and dryers before using them. They might need several days to dry.
 
Mold

Mold can produce allergens, and, in some cases, potentially toxic substances that can make you sick, so you need to ensure your home is as mold-free as possible.

Water damage should be taken care of within 48 hours after the incident or mold growth (or worse, bacteria and viruses) will occur.

The best way to prevent mold is to remove wet contents from your home immediately.

Wet items should be cleaned with a pine-oil cleanser and bleach, completely dried, and monitored for several days for any fungal growth and odors.

Dry out damaged rooms by opening windows and using high-pressure fans. If your carpets are damaged, you should strongly consider installing new ones.

Keep the indoor humidity low, ideally from 30 percent to 50 percent. Make sure places of high humidity, such as bathrooms, are well-ventilated. Use a dehumidifier whenever necessary.

Even if you remove the mold, if the water problem (i.e. a leaky pipe or cracked foundation) is not fixed, the mold will come back.
 
Hiring a Contractor

Do the research. Ask friends and neighbors and read reviews. Make sure the contractor can do the type of work needed, foundation and basement crack repair . And check the contractor’s current references.

Check withe the Better Business Bureau, A1 Foundation Crack Repair has an A+ Rating.

Contractors can’t collect more than one-third of payment up-front unless the job requires materials that must be specially ordered. They also cannot demand any payment before the contract is signed.

Comments (0) | Trackbacks (0) | Permalink |

A leaky basement can be a nightmare. Regular dampness can cause mold growth and musty smells, stored items can be ruined, and the foundation of your home can even be damaged by regular water.  If you have moisture, drips, seepage, or other water related issues in your basement, you need to get it sealed and dried out fast, before bigger problems develop.

The first step to eliminating the moisture problems in your basement is to identify the source of the water. Once you have located where the water is entering the building, you can resolve the problem.

Drainage Problems

Exterior drainage issues can be a major source of water in your basement; if water is brought away from your foundation, it can work its way inside. If you notice water flowing toward your house on rainy days, have blocked or malfunctioning gutters, or can see any signs of erosion, you likely have drainage problems. Some drainage problems are easy to fix: clean and repair your gutters if they aren't working. Pay special attention to downspouts, and be sure that they are directing water away from your house. Other drainage issues can be more difficult to fix. If it isn’t the gutters, you'll want to consult a professional basement waterproofing company. They will be able to identify problematic water patterns.
 
Basement Leaks

Water can also work its way into your basement through cracks or crevices in your foundation. This type of problem usually manifests itself as a visible break or fracture, a trickle of water, or a damp spot. Basement leaks can also be caused by porous foundations. There doesn't necessarily have to be a crack for water to be seeping in. You have a number of options for waterproofing your basement and A1 Foundation Crack Repair, waterproofing specialists, can provide professional basement sealing results.

Make sure you address water problems in your basement promptly; instead of assuming that they will go away on their own, foundation water problems frequently snowball into moisture and mold crises. Take the time to identify and resolve the source of the moisture-you won't regret it.

Comments (0) | Trackbacks (0) | Permalink |

In older homes, we expect basements to leak and have cracks. In general, damp basements seem like standard issue; especially concrete block foundations which seep and weep over time as they settle. Wet basement are just annoying aren’t they, nothing else? It’s something you can take care of later.

Unfortunately, not. The issues that arise with damp basements aren't always easy to recognize, and can create serious problems. Cracks in a solid concrete wall or floor are almost never only on the surface, it is practically a guarantee that the crack goes all the way through. This is a definite problem. Cracks create structural integrity issues, a chance for water to seep through the walls, and introduce the possibility of mold, not to mention pests.

Moisture can build up extremely fast. When these cracks are first detected, you need to take action immediately. Have them inspected and possibly repaired. Understand that putting some concrete on the front and cosmetically sealing the crack is not going to do the trick. It could actually do more damage if water leaks are present because sealing it at the surface could cause pressure to build. Concrete is porous and pressure build up will only cause the water to find another way through.

Hire a professional to take care of all you basements cracks and leaks. Your home is most likely the biggest investment you will ever make. A1 Foundation Crack Repair is the best solution for cracks and leaks in your home’s walls and foundation. Call us as soon as you detect a problem.

Comments (0) | Trackbacks (0) | Permalink |

A leaky basement is a very undesirable situation. Quite often water penetrates your homes foundation. So it is urgent to address this dilemma ASAP. The source of your water leak needs to be repaired to preserve your homes foundation and to prevent serious structural damage to it. Nonetheless, even minor trickles should not be ignored as they can turn into nightmares.

You need to pay attention to where the leak originates. Even though a vast majority of basements are compromised with water infiltration causing damage, the leakage is in fact, concealed. While some of the leaks are hard to detect because they are underground, here are some of the more obvious causes: heavy rainfall, melting ice, gutters and downspouts with leaves and debris. Your gutters may need replaced and are actually directing water toward your house instead of away from it, reverse grading, tree roots, your property naturally slopes down toward your house. But, whatever the reason, you need to restore any loss of structural integrity. Once that is done, you must take all precautions to permanently prevent reoccurrence.

Water leaks can do more than just cause leaky basements. You should protect your personal property from dampness and mildew. Wood can rot causes your wood structures to bow and bend. Paneling can warp or buckle. Albert Einstein once said "An ounce of prevention is worth a pound of cure" so take that advice the next time you see any kind of leak in your basement. Be sure to contact us today to learn more about your home's foundation and how we can put the A-1 method to use for you.

Comments (0) | Trackbacks (0) | Permalink |